Res-Tec Flexitec 2020 Primer 5kg

Flexitec 2020 Primer is a rapid-curing, cold-applied liquid used to prime roof surfaces before applying the Flexitec 2020 System. It is a white, water-based primer that provides a high-quality bond between the Flexitec 2020 System and the underlying substrate.

Features of Flexitec 2020 Primer:

• Rapid-curing: Cures in 30-60 minutes, allowing for rapid installation.
• Cold applied: Can be used in cold weather without heating.
• Water-based: Non-toxic and environmentally friendly.
• High-quality bond: Provides a high-quality bond between the Flexitec 2020 System and the underlying substrate.

Priming requirements are as follows:

• Bituminous surfaces (e.g. felt, asphalt): Priming recommended
• Porous surfaces (e.g. concrete/brickwork, plywood): Priming essential
• OSB3 TG4: Stripe prime board joints
• GRP: No priming required.
• Liquid coatings (e.g. polyurethanes): Adhesion tests recommended
• Single-ply membranes: Adhesion tests recommended

Application of Flexitec 2020 Primer: 

Flexitec 2020 Primer can be applied by brush, roller, or spray. It is essential to ensure the substrate is clean, dry, and free of dust, dirt, and grease before application. The primer should be applied in two coats, with a drying time of 30 minutes between coats.

Specifications of Flexitec 2020 Primer:

Size: 5kg

Colour: White

Coverage: 3.5-5.3m2/kg

Drying time: 30 minutes

Temperature range: 5-30°C

Safety Information

• Keep out of reach of children.
• If in contact with skin, wash immediately with soap and water.
• If in contact with eyes, flush immediately with water for 15 minutes and seek medical attention.

Need help with your order? Our knowledgeable staff can help you out with it. For personalised help, speak to an expert at 0333 700 1111 or drop an email at [email protected]